rev. 1.08.09_149 lps50-m series 1 of 3 embedded power for business-critical continuity lps50-m series 60 watts special features ? medical safety approvals ? universal input ? less than 1u high ? 2 x 4 footprint ? remote sense ? overload and short circuit protection ? adjustable output voltage ? high efficiency ? high mtbf ? built in emi filter (cispr 22 class b) ? led power good indicator ? input power < 74 watts ? complies with en61000 -3-2 ? ul class i approved ? lpx50 enclosure kit available ? dual ac fuses total power: 55 - 60 watts input voltage: 90 - 264 vac 127 - 300 vdc # of outputs: single electrical specifications safety input input range: 90 - 264 vac (wide range) 127-300 vdc frequency: 47-440 hz inrush current: < 60 a peak @ 230 vac, cold start @ 25 c input power: < 74 watts efficiency: 80% - 85% typical at full load emi/rfi: fcc class b conducted; cispr 22 class b conducted; en55022 class b conducted, vde0878pt3 class b conducted safety ground leakage current: 275ua @ 50/60 hz; 264 vac input output maximum power: 60w for convection (lps52, 55 w) adjustment range: 20% minimum hold-up time: 10/ 20 ms 115/230 vac input line overload protection: short circuit protection on all outputs. case overload protected @ 110-160% of normal rating overvoltage protection: 30-50% above nominal output remote sense: compensatesd for 0.5 v lead drop max. will operate without remote sense connected. reverse connection protected. ul: ul 60601-1 csa: csa-c22.2 no. 601.1-m90 vde: en60601-1 ce: lvd & emc ? ? ? ?
rev. 1.08.09_149 lps50-m series of 3 embedded power for business-critical continuity operating temperature: 0 to 50 c ambient derate each output as 2.5% per degree from 50 to 70 c. -20 c start up storage temperature: -40 c to +85 c electromagnetic susceptibility: designed to meet en61000-4; -2, -3, -4, -5, -6, -8, -11 level 3 humidity: operating; non-condensing 10% to 95% rh vibration: iec68-2-6 to the levels of iec721-3-2 mtbf demonstrated: > 550,000 hours at full load and 25 c ambient conditions environmental specifications mechanical drawing 1.30" [33.0] 1.75" [44.5] 3.75" [95.3] 4.00" [101.6] 0.16" [4.0] 2.00" [50.8] r22 sk1 th 1 c1 f2 l1 f1 c2 c n 1 c 3 c5 l3 db1 c32 c24 c30 c1 7 c9 c18 q6 t1 d 4 r 1 l e d 1 d2 t2 r26 c22 sk2 c27 r3a r 3 q5 l2 vr1 di p t3.15a 2.5a 250v ac 2005 250v ac t3.15a + grn/ yel ~ ~ b a htsk_sec c4 2.5a 1 tp1 j i j3 f h j2 e g j1 d tp2 j4 moun ting hol e ?0.16"[4.0] 4 p lace s max . screw h ea d di ame ter .22 (5.6) gn d 3 1 m1 6 1 m2 0.197 (5.0) minimum s tando ff he ight vr1 output v oltag e adjust po t
rev. 1.08.09_149 lps50-m series 3 of 3 embedded power for business-critical continuity americas 5810 van allen way carlsbad, ca 92008 usa telephone: +1 760 930 4600 facsimile: +1 760 930 0698 europe (uk) waterfront business park merry hill, dudley west midlands, dy5 1lx united kingdom telephone: +44 (0) 1384 842 211 facsimile: +44 (0) 1384 843 355 asia (hk) 14/f, lu plaza 2 wing yip street kwun tong, kowloon hong kong telephone: +852 2176 3333 facsimile: +852 2176 3888 for global contact, visit: www.powerconversion.com techsupport.embeddedpower @emerson.com while every precaution has been taken to ensure accuracy and completeness in this literature, emerson network power assumes no responsibility, and disclaims all liability for damages resulting from use of this information or for any errors or omissions. emerson network power and the emerson network power logo are trademarks and service marks of emerson electric co. ?2008 emerson electric co. emersonnetworkpower.com embedded computing embedded power monitoring outside plant power switching & controls precision cooling racks & integrated cabinets services surge protection emerson network power. the global leader in enabling business-critical continuity. ac power connectivity dc power ordering information model number output voltage minimum load maximum load with convection cooling peak load 1 regulation 2 ripple p/p (pard) 3 lps52-m 5 v 0 a 11 a 12 a 2% 50 mv LPS53-M 12 v 0 a 5 a 5.4 a 2% 120 mv lps54-m 15 v 0 a 4 a 4.4 a 2% 150 mv lps55-m 24 v 0 a 2.5 a 2.75 a 2% 240 mv lps58-m 48 v 0 a 1.25 a 1.35 a 2% 480 mv 1. peak current lasting < 15 seconds with a maximum 10% duty cycle. 2 . at 25 c including initial tolerance, line voltage, load currents and output voltages adjusted to factory settings. 3 . peak-to-peak with 20 mhz bandwidth and 10 f (tantalum capacitor) in parallel with a 0.1 f capacitor at rated line voltage and load ranges. pin assignments connector lps52-m LPS53-M lps54-m lps55-m lps58-m sk1-1 line line line line line sk1-3 neutral neutral neutral neutral neutral sk2-1 +5 v +12 v +15 v +24 v +48 v sk2-2 +5 v +12 v +15 v +24 v +48 v sk2-3 common common common common common sk2-4 common common common common common sk2-5 -sense -sense -sense -sense -sense sk2-6 +sense +sense +sense +sense +sense mating connectors ac input: molex 09-50-8031 (usa) 09-91-0300 (uk) pins: 08-52-0113 dc outputs: molex 09-50-8061 (usa) 09-91-0600 (uk) pins: 08-52-0113 emerson network power connector kit #70-841-006, includes all of the above notes: 1. specifications subject to change without notice. 2. all dimensions in inches (mm), tolerance is 0.02 (0.5mm) 3. mounting holes m1 and m2 should be grounded for emi purposes. 4. mounting hole m1 is safety ground connection. 5. specifications are for convection rating at factory settings at 115 vac input, 25 c unless otherwise stated. 6. warranty: 2 year 7. weight: 0.41lbs/0.18kg
|
